Sunday, February 27, 2005

Deep Silver Action

Here is an example of how a deep silver quarter with no masking was found. The post is by Keith (Indiana).

"I started at another spot and about 10 mintues in I get the deep signal that hit far right center. It was bouncing up and down slightly (on SMART FIND) and acted just like a deep quarter I found a couple of years ago with the stock coil When I cut the plug I didn't get a good hit with the probe so I went deeper and sure enough the probe sounded off quarter! It had to be at least 10 inches down and I think it was at an angle. It came out with the 3rd scoop."

Read and see the original post here.

I dont think you'll hear that one in pinpoint ;)